SlingStudio HubExecuting a multiple camera shoot with the. Gives you the freedom to wirelessly connect multiple video sources for recording, streaming, or live switching. The compact, lightweight enclosure houses all the recording, streaming, and wireless tasks, while the production can be live-switched from an iPad or Mac running the Console app. SlingStudio Hub features include chroma keying to enable the use of live video sources such as backgrounds and motion-graphics importing for the creation of animated lower thirds.
Video sources can be reordered and can be switched using voice-activation or custom-timed intervals. The Hub uses a special low-delay mode optimized for teleconferencing and can live stream without the use of a recording device. A PiP function features multiple positioning options, and instant replay intervals can last up to 10 minutes.
Cameras can be connected to the SlingStudio Hub wirelessly or with an HDMI cable. Compatible iOS and Android mobile devices can connect directly over the Studio Hub's Wi-Fi connection, while standard video cameras can connect to separately available CameraLink Wi-Fi transmitters or directly via the Hub's HDMI connection.
Up to ten sources can be connected simultaneously, any combination of four live 1080p30 or 720p60 input sources can be switched, recorded, and streamed, and up to 10 sources can be connected at any given time. If you only need to switch, record, or stream two sources, resolutions up to 1080p60 can be used. Not only can the SlingStudio Hub facilitate live streaming, it also offers a simple workflow for post-production. All media being input into the Hub can be recorded as industry-standard, high-quality H. 264 ISO video files to either an SD card or hard drive connected via USB Type-C or via USB 3.0 through the separately available USB Type-C Expander.
In all, isolated (ISO) feeds of each input channel, the final switched output, line-in audio, and multiview of the isolated channels can be recorded simultaneously. An HDMI to Mini HDMI adapter cable is included for connecting the video output to a standard display, projector, or secondary recording or streaming hardware. The HDMI output can be set to no-latency pass-through mode so any live video being displayed will be in sync with the house audio. Several separately available accessories can enhance the abilities of the SlingStudio Hub.
A battery allows the Hub to operate without mains power, great for impromptu field setups where access to power is limited. The USB Type-C Expander offers multiple USB connections for storage, and a wired Ethernet connection for wired streaming. Altogether, you can build an extremely versatile video production platform. Check the SlingStudio website for an updated list of compatible mobile devices, computers, iPads, and recording media.Switcher: Switch between 10 different video sources using the Console app running on iPad or Mac. Live stream without a storage device when not recording. Ability to reorder video sources. Video transitions: Cut, dissolve, wipe. Instant replay segments of up to 10 minutes. Video compositions: Picture in Picture (PiP) with multiple positions and multiple split views. Audio mixer: Full audio mixer functionality with monitoring mode support, supports always-on audio (ON) or audio follows video (AFV) for all video input sources. Overlays: Lower-thirds (title and scoreboard), text overlays. Custom graphics: Insert, resize, and change the transparency of your own JPG and PNG graphicsincluding logos, lower-thirds, profile pics, ads, or background imagesand overlay them on your live program feed. Chroma key: Use chroma key (green screen) in your productions, including using live video sources as backgrounds. Motion graphics: Import your own motion graphic overlays using chroma keying to use as animated lower thirds, logos, etc. Auto-switching: Switch between video sources automatically using custom time intervals or voice-activated switching. Videoconferencing/low-delay mode: Special low-delay mode optimized for teleconferencing with talent in a remote location.
Wireless Video ConnectionWhile most common switchers require a physical connection via SDI or HDMI, the SlingStudio Hub can connect to up to ten wireless sources via 802.11ac Wi-Fi (up to four sources can be switched from at any given time). Cameras with an HDMI output can connect using separately available CameraLink transmitters, while select iOS and Android smart devices can use their own Wi-Fi connectivity to transmit video using the free Capture app, available in the App Store and on Google Play, respectively.Live Wireless Switching via iPad or MacWith the free Console app, your iPad or Mac can now become a switcher for all the video inputs, as well as an audio mixer. Titles, lower-thirds, transitions, captions, and more can be controlled in real time to give your live switch a professional look. Post-Production ReadyAll video and files recorded by the SlingStudio Hub are stored in a single location. No need to search for multiple cards and spend time syncing them inside your editing software. Just use the free Apple Final Cut Pro X or Adobe Premiere plug-in from Sling to conform the project file inside your NLE and start editing. If you recorded higher-resolution footage internally with the individual cameras used in your production, the plug-in can analyze the recorded footage and replace the lower-resolution SlingStudio Hub recordings with the camera originals. This allows you to remaster your live broadcasts in 4K, or higher resolutions, while keeping all the production choices you made in the moment. UPC: 753960015026SlingStudio CameraLinkWirelessly connect your camcorder or other live video source to the SlingStudio Hub by plugging in the. The CameraLink takes an HD video signal via HDMI and transmits it wirelessly over 802.11 ac Wi-Fi to the SlingStudio Hub for switching, streaming, or recording.
Formats up to 1080p60 at 30 Mb/s are supported. For power, the CameraLink has a built-in lithium-ion battery which provides over two hours of continuous usage.
To recharge, use the included micro-USB cable to plug the transmitter into a separately available standard USB charger (a high-output 2A charger is recommended for best performance). It is worth noting that the unit will continue to function while you are charging the battery, which allows for extended runtimes. A four-segment LED indicator reports the current battery capacity.Use the included shoe mount to secure the CameraLink unit to your camera, be it a DSLR or mirrorless camera, or a standard camcorder. A USB charging cable and a micro-HDMI (Type-D) to Mini HDMI (Type-C) adapter cable are included as well. Cables for cameras which use full-size HDMI ports and micro-HDMI ports are available separately. You can give your USB Type-C equipped device access to the big screen along with some desktop-like functionality. Just plug the integrated USB Type-C connector into your computer to mirror or extend its screen onto a TV, projector, or monitor via HDMI.
You can stream movies in full Full HD 1080p or Ultra HD 4K for an immersive viewing experience. In terms of ports, the USB Type-C Multimedia Adapter houses three USB 3.1 Gen 1 Type-A ports, one USB Type-C port, one SDHC and one microSDHC card reader. Additionally, there is a Gigabit Ethernet jack with an LED indicator, so you can connect to wireless networks and always know when you're connected.
Stream, Connect, and ChargeThe EZQuest 8-Port USB Type-C Multimedia Hub Adapter connects to your Windows or Mac system's USB Type-C port to an HDMI display for an extended or mirrored display, while also connecting up to three standard USB 3.1 Gen 1 devices. USB PD 3.0 Fast Role SwapThis hub features USB PD 3.0 Fast Role Swap to prevent data loss and keeps a secondary monitor on if the USB Type-C power cable is disconnected. USB 3.1 Gen 1Use the standard USB 3.1 Gen 1 ports to connect devices such as flash drives, cameras, external hard drives, or a USB cable for syncing.Gigabit EthernetHigh-speed Gigabit Ethernet lets you have the uninterrupted internet or network connection with LED indicator that shows the connection status. Full Video QualityMirror your system's display to your HDMI display in up to 1080p at 30 Hz or UHD 4K at 30 Hz. Anodized Aluminum Sleeve DesignEZQuest's cable design is precision-engineered with anodized aluminum sleeves on each end of the adapter to minimize electromagnetic interference from other nearby electronics for pristine picture quality. CompatibilityAll Apple computers with USB-C ports.
HP Spectre and HP Pavilion X2. Smartphones and tablets with OTG support. Samsung Galaxy S8, S9, S8 & S9 Plus. Google Pixel 2, Pixel XL.
Microsoft Lumia 950 / 950 XL. HTC Ultra, U Ultra, U11, Bolt.Mac OS X v10.13.6 and above. Windows 10 and Windows 8.1. Chrome OS 46.0.2490.82 and above. Android 7.0 and aboveUPC: 694307400306SlingStudio BatteryUse your SlingStudio Hub untethered from mains power with the. The seamless design allows the Hub to dock right in. All functionality of the Hub is maintained, and the battery can power the Hub for up to three hours.
When the battery is spent, use the power supply included with the Hub to fully recharge the battery in approximately four hours. UPC: 753960015033SlingStudio BackpackPack the entirety of your.
With multiple padded compartments, the backpack can fit the SlingStudio Hub along with multiple Batteries and CameraLinks. A dedicated compartment can also hold a laptop or an iPad along with ancillary accessories. Padded shoulder straps and a top carry-handle offer multiple ways to transport the Backpack along with your gear.Once your production wraps up, pack everything up, and have it ready to go for the next project. The item "Slingstudio HD Video Switcher, 2 Cameralinks, bag & usbC network" is in sale since Tuesday, September 28, 2021. This item is in the category "Cameras & Photo\Video Production & Editing\Distribution Switchers & Routers". The seller is "mostred" and is located in Pawleys Island, South Carolina. This item can be shipped to United States.